RollCheck AI: Automated Rolled Metal Quality Assurance

Control of mechanical properties and microstructure (time resistance to tear, MPa; yield strength, MPa; elongation and contraction after breaking, %...)of metal is produced by an automated non-destructive testing unit in the flow of the unit, without reducing its productivity. The equipment must provide 100% control along the entire length of the rolled metal and discrete scanning along the width of the rolled products. "Type of product – hot-rolled sheet with edged edge made of low-alloy steel: 1. thickness from 10 to 50 mm, 2. width from 1500 to 4600 mm, 3. length up to 18300 mm. 4. The temperature is no more than 50 degrees Celsius. 5. The average error of the correlation dependence between the measured characteristics and the values of mechanical properties obtained by discontinuous methods is not more than 5%.